Hydro Tek Systems 1-800-274-9376

Municipal Governments
Professional Cleaners
Industrial
Agriculture
Recreation
Hospitality
Transportation
Construction

                                                                Find a Distributor       Contact Us           Tech Support

PRO LINE PREVENTATIVE MAINTENANCE:

While your pressure washer has been produced with quality materials and craftsmanship, you as the owner have certain responsibilities for the correct care of the equipment. Attention to regular preventative maintenance procedures will assist in preserving the performance of your equipment. Contact your Hydro Tek dealer for maintenance. A small investment in preventative maintenance will add many hours to the life of your pressure washer. Perform maintenance more often under severe conditions. Do not spray high pressure water onto the machine.

Not all maintenance items apply to all machines. Consult your Owner's Manual for complete details.

  • Engine Oil -Inspect Daily
  • Change Oil - Every 50 hours
  • Change Oil Filter - Every 100 hours
  • Air Cleaner - Inspect Every 50 hours
  • Air Cleaner - Clean Every 3 months
  • Battery - Level Check monthly
  • Engine Fuel Filter - Change 500 hours or 6 months
  • Spark Plug Maintenance - 500 hours or 6 months
  • Clean Fuel Tank(s) - Annually
  • Replace Fuel Lines - Annually
  • Pump Oil - Inspect Daily
  • Pump Oil - Change After first 25 hours, then every 6 months or 500 hours
  • Wobble plate pumps come filled with synthetic oil which does not require changing.
  • Replace Burner Fuel Filter - Monthly-(More often if fuel quality is poor)
  • Remove Burner Soot - Annually or as needed
  • Burner Adjustment/Cleaning - Annually
  • Descale Coil - Annually-(More Often If Required)
  • Replace Spray Nozzle - Every 6 months
  • Replace Quick Connects - Annually
  • Clean Water Screen/Filter - Weekly
  • Clean Float/Supply Tank - Every 6 months
  • Replace HP Hose - Annually
  • Belts Tighten - 6 months
  • Inspect/Replace 6 - months

These are suggested maintenance intervals, if the machine is used in harsh environments or operated continuously the maintenance intervals should be reduced.

 

Fluid descriptions and capacities. (Capacity dependent on model)

Gas Engine - Oil: 30w Motor Oil .63 to 3qt Fuel: Unleaded Gasoline 8qt to 7 gal
Pump, General - Non detergent SAE 30w 34-41oz
Pump, AR - Non Detergent SAE 30w 10-41oz
Pump, Cat - Cat Hydraulic, non-detergent 10w-40 11-25oz

©2004-2008
All Rights Reserved
Hydro Tek Systems, Inc
California, USA
Website Info | Sitemap

E-mail this page to a friend
Industry Links

Sign up for our On-Line newsletter, Click here.