Water Evacuation

The PVAC Hydro Vacuum® makes easy work out of water capture and transfer, which eliminates the costly task of having to continually dump the collection tank. Also nicknamed the 50/50 system because it will pickup and pump out at 50 gpm up to 50’ away. It is also able to discharge vertically up to 40’.
The PVAC control panel has separate, lighted control switches for vacuum and pump out functions. The pump has an inlet basket strainer for collecting debris and solids that can be removed for cleaning. Constructed of a non-corrosive stainless steel frame, 10” air filled tires, and a rust-free, polyethylene, 16-gallon conical bottom collection tank with large 1½” drain valve for heavy solids separation.

Ideal for:
♦ Flood and fire restoration contractors
♦ A pickup system used by wash contractors who are approved for sewer discharge

Technical Data…

♦ 50 gpm centrifugal pump
♦ 35’ GFCI protected heavy-duty power cord
♦ 2-stage, 110” sealed lift vacuum motor, 102 cfm
♦ 2” inlet for high volume pick-up, requires 2” vacuum hose
♦ Requires 1½” or ¾” discharge hose
♦ Electrical requirements: 115v, 20amp outlet or 5500w generator

View the Tek Sheet for the RPVACE1

The Features…

♦ Stainless steel frame for lifetime corrosion resistance
♦ Transfers up to 200’ away.
♦ Designed for versatility and portability, weighing 90 lbs.
♦ Automatic pump out level control
♦ High-water level vacuum safety shutoff

Options…

♦ 50’ x 2” Vacuum hose (DHV02)
♦ Vacuum scupper attachment (ATP65)
♦ Sand Berm (ZMAT6) and Water Berm (ZMAT1)
♦ Twister Vac (ANTV3) rotary surface cleaner attachment
♦ Ground mountable vac dam system (AVP) or vacuum berm