Distributor Special Order Request

Application: Industrial / Commercial / Residential

Brief Description of application:

Initial Order Qty: (How many will you need on your first order?)
Annual Order Potential: (How many per year do you anticipate selling?)

Operating Pressure: Choose One 1000 1100 1200 1500 2000 2100 2500 3000 3200 3400 3500 4000 4500 5000 (Up to 5000 psi)

Discharge Flow: Choose One 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 11 12 GPM (Hot Diesel up to 10 gpm Hot Natural Gas up to 7.5 gpm)

Outlet temperature: Choose One Cold High Temp Inlet 190°F Max 190°F Fixed 225°F Fixed 200°F Adjustable 250°F Adjustable Degrees Fahrenheit (range: Cold- 250°F max)

Frame or Series: No Preference CW CN HN HX SC SS

Side Panels: Stainless Steel or None

Motor / Engine: Choose one from below
(or if no preference then Hydro Tek will choose best option for your needs)

Auto ON / Off Controls: (Electric Motor Only)

MAN = Manual On/Off Switch
ETS = Electronic Trigger Start, 60 second Auto Shut Down Delay
ITS = Instant Trigger Start / Stop
REM = Remote Control / Wash Station / Auto Shut Off
REM = Remote Control / Wash Station / Auto Shut Off / Remote Soap Control

Heat Exchanger (Hot Water Models Only)

Schedule 80 Steel
Schedule 80 Stainless Steel
Schedule 160 Steel (Required for over 4000 psi)
Schedule 40 Stainless Steel

Burner Fuel (Hot Water Models Only)

Diesel
Natural Gas
Liquid Propane

Pump

No Preference
Cat Pump
AR Pump
General Pump

Pump Pressure Unloader

Flow Sensitive
Pressure Sensitive (up to 7 gpm)
Two Spray Gun (up to 12 gpm)
Three Spray Gun (up to 12 gpm)

Power Transmission

Direct Drive (pressure feed recommended)
Belt Drive (recommended with Float or Bulk water supply)

High Pressure Hose

Pressure: 3000 psi, 4000 psi, 5000 psi
Size: 3/8 inch (up to 6 gpm per hose), 1/2 inch
Length: 50 foot, 100 foot

Spray Gun - Trigger Shut Off Gun (required for safety)

Wand: Molded Grip, Vented Grip, Adjustable Pressure

Chemical Injection

None
Inlet with Float tank (requires belt drive pump)
Down Stream

Mounting:

Stationary: None, T200T Skid T300T Skid
Wheels: Casters (4) , 10" Wheels (4), 12" Wheels (4)
Trailer: T200, T300, T400, T500
For Trailers please indicate below if you need brakes or special hitches / plugs
Trailer Specs go here

Additional Comments or Customization:

Your Name:
Company Name:
Phone Number:
Fax Number:
E-mail:
Your Customer Name or Reference Number

Items in Blue are required

Terms: Please review the above specs prior to submitting to Hydro Tek. Upon receipt of your approval the order will be processed. Once a Special Order is approved and processed it can not be canceled, restocked, returned or refused.
Quotes are good for 60 days.

Check here to indicate that you agree with the terms above.
You must agree in order to have your request processed.