Pressure Washer Accessories
We have a full line of accessories for your pressure washer. From water recovery systems to floor cleaners to hose reels.
Water Recovery and Treatment Systems
Water Recovery System / Flatwork Filtration System / Hydro Vacuum®
|
|

ANT28 |

The Contractor
ANT3C |
The Hydro Twister® is a flat surface cleaner that connects to a pressure washer and uses two nozzles rotating at high RPM with in an inch of ground. It will clean concrete at up to ten times faster than a standard wand, with a more consistency and less operator fatigue. Simply connect to your power washer and move the Hydro Twister® over the surface and watch a clean path appear behind the unit.
Click here for more info
|
|
The Hydro Tek mounted Hose Reels provide convenient and quick storage of both discharge and inlet hoses for your power washer. These hose reels have the ability to swivel 180° allowing you to unroll the hose from the side or the back of the trailer. When you are ready to travel simply reel the hose on to the drum with the handle provided and set the lock pin and you're ready to go.
|
|
 |
 |
When combined with your pressure washer or power washer the Wet Sand Blaster nozzle injects sand or soda (baking soda) in to the water stream to aid in blasting off paint, rust scale, or graffiti. It features a tungsten carbide head and a sand probe that will draw sand directly out of the bag. The 400 pound optional hopper can feed the blast media directly in to the hose.
|
|
The Hydro Tek Chemical Rack provides, quick, convenient and sturdy storage for two 5 gallon buckets of chemicals. The rack mounts to the front of Hydro Tek Pro Tow Wash ® trailers which allows you to use the chemicals with out having to move the buckets. Simply drop the Detergent Pick up hose in the bucket and you are good to go.
|
| |
Heat Link
Heat Link hot water generators heat the water from your existing cold water pressure washer. They are Diesel fired and require a 120 volt power source. They can handle water flows up to 6 gallons per minute and pressures to 3500psi. Click Here for more information.
|

CPHL4
Click to Enlarge
|